Service manual

ManualsBrandsSealite ManualsLanternSLC310

SLC310

Installation and Service Manual

Version 1.2

Summary of content (16 pages)

PAGE 1
SLC310 Installation and Service Manual Version 1.
PAGE 2
Table of Contents Introduction 2 Operating Principle 3 Technology 3 SLC310 4 Maintenance & Servicing 8 Flash Codes 9 Troubleshooting 15 Sealite Lantern Warranty 16 Introduction Congratulations! By choosing to purchase a Sealite lantern you have become the owner of one of the most advanced LED marine lanterns in the world. Sealite Pty Ltd has been manufacturing lanterns for over 20 years, and particular care has been taken to ensure your lantern gives years of service.
PAGE 3
Operating Principle The solar module of the lantern converts sunlight to an electrical current that is used to charge the battery. The battery provides power to operate the lantern at night. The flasher unit has very low current requirements. A microprocessor drives an array of ultra bright LED’s through a DC/DC converter, which enables the LED’s to operate within the manufacturer’s specifications. The battery is protected from over-charging within the circuit to ensure maximum battery life.
PAGE 4
SLC310 Model The Sealite SLC310 compact 3nm solar marine lantern is completely self-contained, and specifically designed for a range of low maintenance applications. The light boasts a large internal battery compartment, a 20 LED flasher unit, and 4 premium-grade solar modules mounted to collect sunlight at all angles. The battery and driving circuitry is conveniently accessed from the top of the lantern assembly – allowing for easy battery replacement at any stage of the products life. Fig 1.
PAGE 5
Installation of SLC310 Model Lantern is activated by connecting the battery terminals. Flash setting needs to be set prior to activation. Item 1 2 3 4 5 6 7 8 9 Description SLC310 Base SLC310 Lens Assembly Battery 12v 7.5Ah Battery Clamp Washer M5 Wing Nut M5 O-Ring, ∅130 x 4.0 Socket Head Screw M6 x 16 Protective Sleeve for Base Fig 2. SLC310 Solar Marine Lantern components 5 Latest products and information available at www.sealite.com.
PAGE 6
1. Remove the four socket-head screws on the top lens assembly and open. 2. Adjust the Intensity setting using the DIP switches (detailed below) 3. Adjust the Flash Code with the rotary switches located on the underside of the light head. 4. Adjust the rotary switches (A and B) to desired flash setting (see ‘Selecting a Flash Code’, below). 5. Connect the 4-pin connector ends together to power up the unit. 6. The unit is now ready for normal operation, once placed in darkness. 7.
PAGE 7
Maintenance and Servicing Designed to be almost maintenance-free, the SLC310 requires minimal attention, though the following maintenance and servicing information is provided to help ensure the life of your Sealite product. 1. Cleaning Solar Panels- occasional cleaning of the solar panels may be required. Using a cloth and warm soapy water, wipe off any foreign matter before rinsing the panels with fresh water. 2.
PAGE 8
Flash Codes SEALITE® code reference is listed by number of flashes For the latest version of this document, check: http://www.sealite.com.au E-mail: info@sealite.com.au Symbols FL F Q VQ OC ISO LFL MO Flash followed by number eg.
PAGE 9
SWITCH A B 0 0 D 3 E 3 F 3 7 3 8 3 9 3 A 3 8 4 B 3 9 4 C 3 F 4 1 0 0 5 0 4 2 0 3 0 4 0 5 0 6 0 7 0 1 2 8 0 9 0 D 6 1 5 A 0 2 5 B 0 3 5 C 0 D 0 2 2 5 4 E 2 4 6 4 5 5 5 E 0 F 0 6 5 0 1 1 1 2 1 3 2 3 6 F 2 3 1 8 5 4 1 5 1 9 5 6 1 7 1 4 2 8 2 0 3 FLASH CODE ON OFF F (Steady light) VQ 0.5 S VQ 0.6 S VQ 0.6 S Q1S Q1S Q1S Q1S Q1S Q 1.2 S Q 1.2 S Q 1.2 S FL 1.5 S FL 1.5 S FL 1.5 S FL 1.5 S FL 2 S FL 2 S FL 2 S FL 2 S FL 2 S FL 2 S ISO 2 S FL 2.5 S FL 2.5 S FL 2.
PAGE 10
SWITCH A B 1 3 2 3 C 6 B 5 C 5 8 1 9 1 A 1 7 5 B 1 5 2 9 2 6 4 3 3 4 3 A 4 9 6 5 6 D 5 C 1 E 5 B 4 6 2 A 2 6 6 B 2 F 5 C 4 7 6 0 6 1 6 D 1 2 6 E 1 1 4 C 2 D 2 7 2 2 4 8 6 5 3 6 3 F 1 D 4 3 4 0 2 4 4 7 4 A 6 E 4 FLASH CODE ON OFF OC 5 S OC 5 S FL 6 S FL 6 S FL 6 S FL 6 S FL 6 S FL 6 S FL 6 S FL 6 S ISO 6 S LFL 6 S OC 6 S OC 6 S OC 6 S FL 7 S FL 7 S OC 7 S FL 7.5 S FL 7.
PAGE 11
SWITCH A B 0 A E B 1 A 3 A F 9 2 C 4 A 0 7 1 7 9 B 2 9 5 A 7 8 A A 6 A 7 A 9 9 2 8 3 7 3 9 A 9 7 B 8 A 4 7 8 8 5 7 4 C 5 C F B 9 A 9 8 6 7 7 7 6 9 8 7 B 9 9 7 4 9 B A C 9 D 9 A 8 A 7 8 B C A D A FLASH CODE ON OFF ON OFF FL (2) 4 S VQ (2) 4 S FL (2) 4.5 S FL (2) 4.5 S FL (2) 5 S FL (2) 5 S FL (2) 5 S FL (2) 5 S FL (2) 5 S Q (2) 5 S Q (2) 5 S FL (2) 5.
PAGE 12
SWITCH A B 9 7 5 9 0 C E 9 3 C 2 B A B 2 A F A 0 B B 7 B 8 C 8 C B C 7 D B D 7 3 8 8 9 B B D 8 1 B E A E 7 B 6 4 8 5 8 1 8 F 7 9 D 0 8 F 8 0 9 1 9 6 8 1 C 4 B 3 B 5 B 6 B FLASH CODE ON OFF ON OFF ON OFF Q (3) 5 S VQ (3) 5 S VQ (3) 5 S VQ (3) 5 S FL (3) 6 S FL (2+1) 6 S Q (3) 6 S FL (3) 7 S FL (3) 8 S FL (3) 9 S FL (3) 9 S FL (3) 10 S FL (3) 10 S FL (3) 10 S FL (3) 10 S FL (3) 10 S FL (3) 10 S FL (2+1) 10 S OC (3) 10 S Q (3) 10 S FL (2 + 1) 10 S FL (3) 12 S FL (3) 12 S FL (3) 12 S FL (3) 12 S FL (2+1
PAGE 13
SWITCH A B B F B D 8 D 1 D 2 D F E B E 4 F C E 3 D A D 4 D 8 E 7 D D E C D 5 D 0 D 3 F 0 F E E 6 F FLASH CODE ON OFF ON OFF ON OFF ON OFF VQ (4) 4 S Q (4) 6 S Q (4) 6 S FL (4) 10 S FL (4) 10 S Q (4) 10 S FL (4) 12 S FL (4) 12 S FL (4) 12 S FL (4) 12 S Q (4) 12 S FL (4) 15 S FL (4) 15 S FL (4) 15 S FL (4) 16 S FL (4) 20 S FL (4) 20 S FL (4) 20 S FL (4) 20 S Q (4) 20 S Q (4) 28 S FL (4) 30 S 0.25 0.3 0.4 0.5 0.8 0.3 0.3 0.5 0.5 0.8 0.3 0.5 1.0 1.5 0.5 0.3 0.5 0.5 1.5 0.5 0.5 0.5 0.25 0.7 0.6 1.
PAGE 14
SWITCH FLASH CODE ON A B MORSE CODE ( ) INDICATES LETTER 7 8 MO (A) 6 S 0.3 7 B MO (A) 8 S 0.4 8 8 MO (A) 8 S 0.8 B 8 MO (U) 10 S 0.3 C 8 MO (U) 10 S 0.4 D 8 MO (U) 10 S 0.5 9 8 MO (A) 10 S 0.5 8 9 MO (D) 10 S 5.0 A 8 MO (A) 15 S 0.5 F 8 MO (U) 15 S 0.6 0 9 MO (U) 15 S 0.7 1 9 MO (U) 15 S 0.7 7 D MO (B) 15 S 1.5 OFF ON OFF 0.6 0.6 1.2 0.7 0.6 0.5 0.5 1.0 1.5 0.3 0.5 0.7 0.5 1.0 2.0 2.4 0.3 0.4 0.5 1.5 1.0 2.0 0.6 0.7 0.7 0.5 4.1 5.0 3.6 0.7 0.6 0.5 7.5 1.0 11.0 0.3 0.5 0.7 0.5 ON OFF 0.9 1.2 1.
PAGE 15
Trouble Shooting Problem Remedy Lantern will not activate. Timing codes will not change. Lantern will not operate for the entire night. • Ensure lantern is in darkness. • Wait at least 60 seconds for the program to initialise in darkness. • Ensure switch setting is on a valid code (not unused flash code). • Ensure battery terminals are properly connected. • Ensure battery voltage is above 12volts. • Turn rotary switches several times to ensure contacts are clear.
PAGE 16
Sealite Lantern Warranty Activating the warranty Upon purchase, the Sealite warranty must be activated for recognition of future claims. To do this you have two (2) options: 1. Postal registration - Please complete the Sealite Warranty Registration card and return to Sealite within 30 days of your purchase. 2. Online registration - Please complete the Online Registration form at; www.sealite.com.au or www.sealiteusa.com Sealite Pty. Ltd.