Service manual

Latest products and information available at www.sealite.com
20
SL-07 Series
1–4NM+ Marine Lanterns
Test Mode / Congure
Pressing the T/C button for upto 5 seconds places the light in Test Mode. The light will ash once in
response to the T/C button being pressed and then turn off.
T/CT/C
R L
FC I B
3
4 5 6
7 8 9
0
1 2
Normal Operation
The light will return to normal operation once it has not detected a valid key press for 30 seconds. The
light will ash once to indicate it is returning to normal operation.
Read
Pressing the Read followed by one of the conguration keys shall cause the light to ash the
congured value.
Example Key Sequences:
The light ashes the ‘IR Remote’ number belonging to the currently set Flash
Code. Refer to the Flash Code tables to match the ‘IR Remote’ ash number
to the Flash Code.
The light ashes the current intensity setting: 1 ash for 25%, 2 for 50%, 3 for
75% and 4 for 100%.
The light ashes the current battery status.
The light ashes the sunset level in Lux, followed by a 2 second gap, followed
by the sunrise level. Levels are in the range of 1 to 9.
T/CT/C
R
L
FC I B
3
4 5 6
7 8 9
0
1 2
T/CT/C
R
L
FC I B
3
4 5 6
7 8 9
0
1 2
T/CT/C
R
L
FC I B
3
4 5 6
7 8 9
0
1 2
T/CT/C
R L
FC
I
B
3
4 5 6
7 8 9
0
1 2
T/CT/C
R L
FC I
B
3
4 5 6
7 8 9
0
1 2
T/CT/C
R L
FC
I B
3
4 5 6
7 8 9
0
1 2
T/CT/C
R
L
FC I B
3
4 5 6
7 8 9
0
1 2
T/CT/C
R
L
FC I B
3
4 5 6
7 8 9
0
1 2
T/CT/C
R L
FC I B
3
4 5 6
7 8 9
0
1 2
T/CT/C
R L
FC I B
3
4 5 6
7 8 9
0
1 2
T/CT/C
R L
FC I B
3
4 5 6
7 8 9
0
1 2
T/CT/C
R L
FC I B
3
4 5 6
7 8 9
0
1 2
IR Controller Functions