User's Manual

Buttons
Functions
Switch
On/Off
Mode
Press the button to switch among 4
modes.
Color/brightness
Press the button to switch among eight
colors and press and hold the button to
switch among six levels of brightness
Control via App
Download the App.
Download and install the App from App store (for iOS) or Google Play (for Android).
Tip: The App is compatible with the following phone systems: iOS 9.0 and above,
Android 5.0 and above.
Connect with the App
1. Turn on the Bluetooth on your phone and make sure the LED strip is powered
on.
2. Turn on the App and tap the "+" icon.
3. Select the CIL0130 from the device list.
FAQs:
1. No light: Check whether the light is properly wired and the interface is tightly inserted.
2. Bluetooth connection fails: Make sure that the Bluetooth on your phone is on.
3. Compatibility fails: Please replace a new phone or upgrade your phone system.
4. Search fails: Keep the product within 2m to your phone.
5. For any questions, please contact our after-sale services.
NOTE:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to