Operation Manual

EN-45
Protecting Images/Video Clips
Set the data to read-only to prevent images from being erased by mistake.
Protecting Images
1. Press the [
] button.
 The last recorded image appears
on the LCD monitor.
2. Select the image that you want to
protect with the  /  buttons.
3. Press the
 / button.
 The playback menu is displayed.
4. Select [Protect] with the
 /  buttons,
then press the OK button.
5. Select [Single] or [All] with the  / 
buttons, then press the OK button.
6. Select [Set] with the
 /  buttons,
then press the OK button.
 Press continuously the  button to
return to the playback mode.
The protect icon [
] is displayed
with the protected image.
 When [All] has been selected, [ ]
is displayed with all the images.