Operation Manual

EN-29
Using the Flash in External Flash Mode
When the camera’s Scene mode is set to Ext. Flash, the camera’s flash is set to
Forced Flash and will always fire. When the camera’s flash fires, it will automatically
fire the optional External Flash accessory. Refer to the SeaLife Flash instruction
manual for detailed operating instructions about the optional external flash accessory.
Refer to the section in this manual titled “Scene Mode Selection” for more information
about selecting the Ext. Flash Scene mode.
In order to achieve proper image exposure, it may be necessary to select from one of
the following three flash modes:
[Blank] - This is the default setting ideal for proper exposure from 1 yd
(1m) to 2 yd (2m).
[ ] - Macro Flash This flash setting is ideal for shooting distances inside of 1 yd.
(1m).
[ ] - Far Flash Select this flash mode for best exposure beyond 2 yds(2m)
shooting distance.
 The above shooting distance may vary depending on water visibility and the
reflectivity of the subject. Experiment with different flash modes and adjust
accodingly.
 Press the flash button and select the appropriate flash mode.
 To further brighten or darken the images, adjust the exposure compensation.