User Manual

8
Getting to Know your Automatic Sealer
W-Series Foot Sealers are simple and efficient sealing machines.
Figure 1. W-Series Automatic Sealer Overview
Power Switch
Turn off when sealer is
not in use
Manual / Auto Mode
Switch between manual
(operated by foot switch)
and automatic modes
Recycle Time Setting
Adjust time between
sealing cycle which is
based on speed of
operator
Sealing Time Setting
Adjust seal time based
on your bag thickness
Congealing Time Setting
Adjust congeal time based
on seal time and bag
thickness. Congeal time is
usually 2X greater than
seal time
Foot Switch
In manual mode, press
foot switch to activate
sealing process
Sealing Jaw
Place material to be
sealed on the bottom
sealing jaw
Double Impulse Sealer
Heating is located on
both upper and lower
jaws for better heat
penetration