User Manual

5
Introduction
W-Series automatic sealers are ideal for high volume continuous poly bag and other thermoplastic sealing.
The sealer allows you to keep both hands free for quicker and more accurate sealing. Our W-Series auto
sealers can seal polyethylene, polypropylene, saran, nylon, static shielding bags, Mylar up to 30mil in total
thickness depending on the model # of the sealer.
Features of the W-Series Automatic Sealers
Your automatic sealer is equipped with a wide range of standard features and capabilities.
 Simple to use - no operator training needed
 Impulse sealing - no warm up time needed
 Dual mode operation: auto or manual
 Foot switch allows hands free operation
 Die cast construction
 3 separate control settings for sealing time, recycle time, and congealing time
 Includes electric foot switch and adjustable work table
 Equipped with either 2.7mm, 5mm, or 10mm seal widths
 Option: double impulse sealing with heat on both sealing bars for sealing thicker materials
 Manufacturer spare parts kit includes: 2 heating elements
How Do W-Series Automatic Sealers Work?
Our W-Series automatic impulse sealers fire a short burst of electricity through a
specially designed heating wire to weld thermoplastic materials together. The
length of the seal time will depend on the sealing characteristics of the bag being
sealed. The sealing process is simple: The operator places the bag between the
sealing jaws and presses the footswitch to activate the unit. The sealer is equipped with a digital display
for easy timer settings. The seal process ends automatically once the preset seal time is reached. The
operator retrieves the sealed bag and repeats the process. Bags are sealed repeatedly and uniformly.
Basic
Principles
Place material on lower
jaw and activate
footswitch