User Manual

13
For double impulse automatic sealers, kits include (2) heating elements, (2) PTFE adhesives, and 2ft long roll
of PTFE cover. For replacement kit part #s, refer to your model #. **Please note that heating elements
and kits are NOT interchangeable with one another.**
W-305AT
W-455AT
Replacement Kit
RK-12AD-W-305AT
RK-18AD-W-455AT
Heating Element (5mm)
HE-12-5-W-305A
HE-18-5-W-455A
PTFE Adhesive
TA-12
TA-18
PTFE Cloth
TR-12-12
TR-18-12
Silicone Rubber (not included in RK)
SR-W-300A
SR-W-450A
To install your replacement kit on your sealer, turn off power and unplug sealer.
Removing Worn Parts.
1. Loosen the screws on the PTFE cover plate (Figure 10, Item #16).
2. Remove the heating element cover.
Figure 3. Loosen screws on PTFE plate.
Figure 4. Remove heating element cover
3. Lift up the PTFE cover to expose the heating element (Figure 10, Item #19).
4. Unscrew the nut on the mounting spring (Figure 10, Item #23-2). Remove the heating element
by lifting off the eyelets of the heating element from the mounting spring on both ends.
Figure 5. Lift up the PTFE cover to expose the heating element
Figure 6. Remove heating element cover
5. Peel off the PTFE adhesive under the heating element.