Specification Sheet

W-SERIES AUTOMATIC
Automatic Sealers
Model # Seal
Length
Seal
Width
Power Weight Dimensions
W-300A
W-305A
W-3010A
12”
2.7MM
5MM
10MM
450W
600W
1000W
50
52
55
17.3” x 14.2” x 7.9”
W-450A
W-455A
W-4510A*
18”
2.7MM
5MM
10MM
600W
800W
2654W
56
59
59
20.9” X 14.2” X 7.9”
W-600A
W-605A
W-6010A*
24”
2.7MM
5MM
10MM
800W
1300W
3080W
68
70
72
26.8” X 14.2” X 7.9”
W-755AA
30”
5MM
1200W
82
32.7” X 14.4” X 9.8”
• Automatic impulse sealing with precise electronic control
• Dual mode operation: automatic or manual
• Foot switch allows both hands to be free
• 3 separate control settings for sealing time, recycle time, and congealing time
• Includes electric foot switch and worktable
W-Series automatic sealers are designed for the continuous sealing of thermoplastic materials. Depending on the model of the sealer,
materials up to 30” wide and 15mil total thickness can be sealed. Seal widths of 2.7mm , 5mm, and 10mm are available. Unit is controlled by a
plug-in transistorized circuit board. Equipped with an electronic timer and electromagnet, once correct settings have been established,
consistent seals will be maintained automatically.
Easy to Operate: Automatic or Manual
Updated 07/25/17. Do not reproduce without permission
Model # Seal
Length
Seal
Width
Power Weight Dimensions
W-305AT
12”
5MM
1210W
54
17.3” X 14.2” X 7.9”
W-455AT
18”
5MM
2640W
62
20.9” X 14.2” X 7.9”
We now
carry a
NEW 10mm*
model!
We also carry double automatic impulse sealers which can seal up to 24mil
total thickness. Double impulse sealers use two heating elements (upper and
lower) to fuse materials from both sides at the same time allowing thicker
materials to be sealed.
EASY TO OPERATE
For automatic operation, set the control on auto. Adjust the sealing time (heating time), congealing time (cooling time), and recycle time (automatic
operation of jaws). Insert material to be sealed and when jaw opens, remove sealed material.
For manual operation, set the control to manual. Insert the material to be sealed. Press down on the foot switch to activate the sealing bar.
*Special Order