User Manual

Sealer Sales Page 3
ST-1808-28 Tunnel Service Manual
TABLE OF CONTENTS
___________________________________________________________
Preface
Unpacking 4-8
Warranty Notice 9
Warranty 10-11
Warranty Exceptions 12
Warnings 13-15
Tunnel Section
Description and Specifications 16
Installation and Basic Set-Up 17-18
Front Panel Diagram 19
Sequence of Operation 20-22
Temperature Control Adjustment 23
Troubleshooting 24-33
Troubleshooting–Conveyor Malfunction 25-28
Troubleshooting–No Air Flow 28-30
Troubleshooting–No Heat 31-33
Maintenance 34-49
Maintenance—Replace Conveyor Rollers 35-37
Maintenance—Replace Idler Shaft 38
Maintenance—Replace Drive Shaft 39
Maintenance—Replace Conveyor Motor 40
Maintenance—Replace Heater Bank 41-42
Maintenance—Replace Temperature Controller 43
Maintenance—Replace Blower Motor 44-46
Maintenance—Replace Wear Rails 47-49
Electrical Panel Diagram 50
Electrical Schematic 51
Parts List Nomenclature 52
Replacement Parts List 53-55
Spare Parts List 56