User Manual

Sealer Sales Page 27
ST-1808-28 Tunnel Service Manual
TROUBLESHOOTING—CONVEYOR MALFUNCTION
Conveyor malfunction (continued)
5. Remove end covers and look for obstructed product or lodged
rollers.
(a) Check lubrication of conveyor chains.
6. Make sure the connection wire on the motor and cable are not
loose.
(a) Refer to electrical schematic on page 51 for proper wiring
of the motor.
(b) Check wires 7 and 16 for power. If power present and
motor does not operate, replace motor.
End covers