User Manual

FS- S E R I E S F O O T S E A L E R I N S T R U C T I O N M A N U A L

Operating your Sealer

Assembly Instructions

Figure 3.

1. Position the standing tube (Figure 12, Item #F2) on the footboard base (Figure 12, Item

#L5)

. Tighten the base screw (Figure 12, Item #16) to lock the tube in place.

2. Attach the foot pedal

(Figure 12, Item #L6) to the base (Figure 12, Item #L5). Tighten the

screws on base to secure the foot pedal.

3. Position the sealer head (Figure 12, Item #L1) on the standing tube. Secure the sealer head to

the standing tube with screws

(Figure 12, Item #10) on both sides of the sealer head.

4. Insert the pulling plate/short pulling pole

(Figure 12, Item #F8+F9) through the small spring

(Figure 12, Item #S10) and set it on top of the upper jaw (Figure 12, Item #L2). Place the

large spring

(Figure 12, Item #C8) on the lower jaw.