User Manual

F R M - 1 1 2 0 C I N S T R U C T I O N M A N U A L

Introduction

Our band sealers are equipped with electronic temperature controllers and variable speed conveyors to

seal all types of thermoplastic materials (PP, PE, stand up pouches, gusseted bags, moisture barrier bags,

etc.). Seals are created using PTFE bands which maintain high seal quality and produce consistently

strong, clean seals on all heat sealable bags. Because bags are placed on a conveyor system, the width of

the bag does not matter. These versatile machines offer several adjustments which allow them to be used

for a wide range of applications. These machines are used extensively in the food, medical, chemical,

cosmetic, and electronic industries.

The FRM-1120C band sealer adopts dry ink coding designed to print date and lot codes at the seal line.

Ink dries instantly upon contact with packaging materials and produces clear and legible characters. For

FRM-1120C, the standard font size is 18PT which allows for two-line printing. An optional 10.5PT font

size which allows for three-line printing can be purchased separately. Please ask your distributor for more

information.

The FRS-1120W band sealer adopts hot stamp printing to print date and lot codes at the seal line. Hot

stamp printing is similar to an analog printing press. Color ribbon printing provides a stronger adhesion

print than dry ink coding and works best for humid environments.

The FRM-1120C / FRS-1120W are stand alone units with casters providing easy mobility for the band

sealer. In addition, the sealer is equipped with a tilting mechanism which allows the conveyor to tilt up

to 30 degrees, ideal for packaging liquids and grains.

Features of our Band Sealer

Your band sealer is equipped with a wide range of standard features and capabilities.

 Simple to use – minimal operator training

 Fast warm up time

 Unit feeds right to left

 Rust inhibiting stainless steel construction

 Equipped with bag entry guide for easy bag feeding and straight seals

 Industrial grade safety emergency stop switch

 10amp protection power surge breaker

 Equipped with photo sensor for optimal printing precision

 Dry ink coder for printing characters at the seal line (FRM-1120C)

 Hot stamp printing coder for printing characters at the seal line (FRS-1120W)

 Wide seal (8mm) to assure airtight seal

 PTFE sealing belts

 Extended forced-air cooling system with extra wide cooling bars and 6 heat transfer orifices

 One pair of brass sealing bars

 Sealing method – constant heat

 Adjustable 2-way pulley system for optimal stability and embossing clarity