User Manual

F R M - 1 1 2 0 C I N S T R U C T I O N M A N U A L
48
Troubleshooting
Unable to Set Temperature Controller
If operator is unable to set the temperature or is finding the temperature settings inaccurate, we suggest
resetting the temperature controller to the default settings. Please follow the following steps:
 Hold the for at least three seconds.
 Press the or key at the display for the parameter for which the setting is to be changed.
The parameter setting display will appear. Use the or key to change the setting.
Example: Changing the Input Type from 0 to 1 is below:
 Enter to move on to the next parameter display.
 To save the settings, hold again for more than three seconds. The temperature controller will
automatically restart and save the settings.
 Please note: This temperature controller can only be set to Celsius. If you try and change
the temperature unit to F, the temperature controller will not function properly.