User Manual

F R M - 1 1 2 0 C I N S T R U C T I O N M A N U A L

Printing Operation - FRS-1120W

FRS-112W is equipped with a hot stamp ribbon printer. The printer works much like an analog printing

press. Types are loaded into the imprinter then heated. An inked printing ribbon sits between the type and

material to be printed. The heated type presses onto the ribbon, melting the ink onto the material. A spring

biased dancer assembly having a idler roller maintains a tension on the inked print ribbon as the inked print

ribbon is transferred from a supply reel to a rewind reel. To change the code of the hot stamp, types can be

easily replaced.

Figure 24. Type Example - FRS-1120W

1. Determining the correct position for printing on your bag will require some trial and error.

Adjust the Speed, Coarse Tuning, and Fine Tuning knobs to determine the optimal printing

location on your bag.

Figure 25. FRS-1120W Control Panel

2. To install the hot stamp ribbon, web the imprinter per diagram below (Figure 26). Be sure that

the dull side (pigment) of the tape faces away from printing head and toward the base of the

imprinter. To web the ribbon through the ribbon press wheel, pull the handle upwards to release

the ribbon press wheel. Lock the ribbon to the collect wheel by using a piece of scotch tape to