User Manual

F R M - 1 1 2 0 C I N S T R U C T I O N M A N U A L

setting (or counterclockwise). If you want to print on the right side of the bag, turn the coding

seat to a higher setting (or clockwise).

Printing Optimization

1. Print quality will be determined by the degree of ink melting, distance between the ink roller and

printing wheel and distance between the silicone wheel and printing wheel.

2. Over time, decrease the gap between the ink roller and printing wheel.

3. A newer ink roller will require a lower temperature vs. an older ink roller. Make adjustments to

ink temperature as necessary.

4. Ensure there is adequate pressure on the silicone wheel (Part #BS-57A) by the printing wheel.

We suggest using factory default settings before making any adjustments. Adjustments may be

needed based on material thickness.

5. If the printing wheel rotates and there is no thermoplastic material running through the band

sealer, excess ink will rub off on the silicone wheel. Clean the silicone wheel with a shop cloth

and silicone spray to remove any excess ink.

Remove the ink roller from unit until sealer is ready for use. If ink roller is left in the

machine while not in use, this may result in melting of the ink roller and messy print. To

clean, wipe down belts, silicone wheel, and other parts with silicone spray and cloth.