User Manual

F R M - 1 1 2 0 C I N S T R U C T I O N M A N U A L
15
2. Installing Types/Characters on Print Wheel. Place selected characters in the grooves of the
printing wheel. Be sure to insert the characters from right to left to ensure actual imprint prints
correctly on your packaging material. Once completed, insert the silicone pin at the top of the
printing wheel to hold the characters in place.
Figure 14. Place characters from right to left.
Figure 15. Place silicone pin to lock characters in place.
3. Installing the Print Wheel. To insert the spring-loaded print wheel into the print wheel base,
ensure that the pin on the printing wheel is aligned with the notch of the print wheel base. Gently
insert the print wheel into the base. Lock the print wheel by pushing the red handle in until you
feel the handle lock into place.
Figure 16. Ensure two holes and pins line up with the base
Figure 17. Ensure two holes and pins line up with the base