User Manual

F R M - 1 1 2 0 C I N S T R U C T I O N M A N U A L

Printing Operation - FRM-1120C

FRM-1120C is equipped with a dry ink coding feature capable of printing characters at the seal line. Ink

dries instantly upon contact with packaging materials and produces clear and legible letters/numbers.

Standard font size is 18PT which allows for two-line printing up to 20 characters per line. Optional print

wheel which allows for 40 characters per line is available to be purchased separately. In addition, we also

carry 10.5PT font size which allows for three-line printing can also be purchased separately. Ask your

distributor for more details. Check our YouTube channel (https://www.youtube.com/user/sealersales) for

a video demo.

Figure 10. Standard font size - 18PT

Figure 11. Optional 10.5PT font size available for purchase

1. Removing Print Wheel. To remove the printing wheel from the base, push the red handle in and

turn clockwise until you feel the handle unlock. (See Figure 12 and Figure 13 for locked and

unlocked positions). You may need to turn the wheel a few times until the red handle unlocks and

pops out of its locked position.

Figure 12. Locked Handle Position

Figure 13. Unlocked Handle Position