User Manual

F R M - 1 1 2 0 C I N S T R U C T I O N M A N U A L
13
9. Emergency Stop – Press the emergency stop to turn off the machine. In order to restart the
machine, you must release the emergency stop by turning the knob 120˚ clockwise.
10. To shut down, turn off the heater switch and allow the temperature of the machine to drop
before turning off the power and fan switches. Following this shut down procedure will significantly
prolong the life of machine and sealing belts.
Sealing Optimization
1. Sealing performance can be adjusted with the sealing temperature and sealing speed. The higher
the speed the less exposure the material to heating blocks and therefore a higher temperature will
be required to seal the material.
2. Try a variety of different sealing temperatures and conveyor speeds to get the optimal seal for
your material.