Technical Specifications

White Elastomeric
Roof Coating
10 Year Protection
Revised: 11/15
Manufacturer:
ThorWorks Industries, Inc.
2520 S. Campbell St.
Sandusky, OH 44870
Phone: [phone]
Fax: [phone]
Description
White Elastomeric Roof Coating is a 100% acrylic
elastomeric rubber-like material designed to
protect a variety of roof surfaces. The outstanding
reflectivity will lower interior home and building
temperature providing energy savings up to 35%.
Uses
A variety of roof surfaces including metal, mobile
homes, aged aluminum roof coatings, concrete,
campers/RV’s, and more.
NOTE: This product is not recommended for
gravel, dead level (flat), or shingled roof surfaces.
Surface Preparation
Clean Roof - Sweep off all dirt, dust, and debris.
Remove rust, mildew, oil, grease, or other foreign
material on the surface. Allow freshly applied
asphalt roofs to cure a minimum of 4 weeks
prior to applying this coating. Scrub roof with
solution of TSP (Trisodium Phosphate) and water.
Remove mold and mildew with bleach solution
(1 part chlorine bleach and 3 parts water). Rinse
thoroughly and allow to dry..
Application
Applying Roof Coating - Stir pail thoroughly. Do
not dilute. For best results apply White Elastomeric
Roof Coating with a soft brush, 3/4” nap paint
roller, or high pressure sprayer. For optimum
performance and durability, apply a second coat.
NOTE: This product is not recommended for
gravel, dead level (flat), or shingled roof surfaces.
Clean Up
Wash tools with water before material dries.
Weather Conditions
• Application temperature must be a minimum of
60 °F and rising. Do not apply when temperature
is expected to drop below 60 °F within a 24 hour
period.
• In areas where dew or fog accumulates in the
early evening, it is best to coat in the morning.
Stop coating by early afternoon (3:00 pm) to
prevent wash off, which will occur if dew, fog, or
rain arrives before coating dries.
• Do not apply if rain is imminent or forecast within
24 hours of application.
Coverage (Approximate)
.9 gallons will coat approximately 50-100 square
feet of roof surface.
Precautions
• Do Not Heat or Thin
• Do Not Freeze
• Do Not Store at Temperatures Below 50 ºF
Safety & Environmental Precautions
• Refer to Material Safety Data Sheet Before Using
• For Exterior Application Only
• Close Container When Not in Use
• Environmental Information is on the Material
Safety Data Sheet
• Do Not Reuse Empty Container
• Volatile Organic Content (VOC) is 100 gm/liter
max
• KEEP OUT OF REACH OF CHILDREN
Ingredients: Cas No.
Water 7732-18-5
100% Acrylic Emulsion Polymer Proprietary
Limestone 16389-88-1
Titanium Dioxide 13463-67-7
Ester Alcohol 25265-77-4
www.sealbest.com