Owner's manual

4
3 Intended use (g.
1
, page 2)
DTM01TankMonitorpanelindicateswhenawastewaterholdingtankisalmost
full. This monitor helps prevent damage to the boat that can happen because of
accidentaloverllingoftheholdingtank.
Caution!
Donotuseinfueltank.
Intended use DTM01 Tank Monitor
4 Components and functions (g.
2
, page 2)
Probe Assembly with Float Switch
The probe assembly installs into a 1.25-inch (32 mm) dia. opening on the
topofaDometic
®
holdingtankorotherholdingtank.Asthelevelofholding
tankcontentsrises,theoatswitchinsidethetankispushedupwardand
activatesthe“FullTank”lightontheindicatorpanel.
Indicator Panel
Theindicatorpanelhasasinglelightwhichisactivatedbytheoatswitch
insidetheholdingtank.Whenthe“FullTank”lightisactivated,theopera-
tionofanyplumbingxtureconnectedtotheholdingtankshouldstopuntil
thetankisemptied.
Item Description
1 Probeassemblywithoatswitch
2 #8 fasteners for probe assembly
3 Indicator panel
4 #6 fasteners for indicator panel
Caution!
Operatormustknowlocalregulationsforemptyingaholdingtank.