Owner manual

8
Dometic Tank Discharge ControlInstallation
7.1 OPTION 1: DTD01 discharge control panel only
(g.4,page3)
1. When boat is in unrestricted waters and pump-out is desired, insert key into switch and turn to
momentary“Start”position(1).
2. Allowkeytoreboundto“PumpOn”position(2).Greenlightindicatesthatpumpisrunning.
3. Whenpump-outiscomplete,turnkeyto“Off”position(3)andremovekeyfromswitch.
4
7 Operation
6.3 Key to DTD01-DTM04 system wiring (g.7,page4)
Ref. Description
A DTD01controlpanel
B Dischargepump
C DTM04indicatorpanel
D Wastewater tank
E 12or24VDC
F VDCground
G Dischargepumpcircuitbreakerorfuse
H 12VDC
I 24VDC
J 1-amp circuit breaker or fuse
K Toilet system circuit breaker or fuse
7
Ref. Description
L +VDCtoelectrictoiletsystem
M Full level probe
N Mid level probe
O Low/Empty level probe
P Red
Q Black
R Brown
S Green
T Blue
U Yellow
V Orange
6.2 Key to DTD01 - discharge pump system wiring (g.5,page3)
Ref. Description
A DTD01controlpanel
B Dischargepump
C 12or24VDC
D VDCground
5
Ref. Description
E Dischargepumpcircuitbreakerorfuse
F Red
G Black
H Brown
1.Use14gaugeorlargerdiameterstandardcopperwire.
2. Maximum discharge pump circuit breaker or fuse rating: 20 amps.
1. Heavy line indicates 14 gauge or larger stranded copper wire is required.
2. Other wire can be 18 gauge stranded copper wire or larger.
3. Maximum discharge pump circuit breaker or fuse rating: 20 amps.