Owner manual

7
SeaLand MasterFlush Toilet Operation
6.4 Indicator lights
“POWER ON” INDICATOR
On the Dometic ush switch panel, a steady green “Power On” light (g.
3
3, p. 6) indicates when
electrical power to the toilet is activated. A momentary ashing green light indicates when ush
mode is changing.
TANK LEVEL INDICATOR
Dometic DFT, DFS and DFP ush switch panels include a bi-color “3/4 Full” (amber) and “Full” (red)
Tank Level light (g.
3
4, p. 6) to indicate when the holding tank is 75% or 100% full (if connected
to a two-level tank monitoring system) and should be pumped out. When the red light is illuminated,
electrical power to the toilet automatically shuts off to prevent overll of the holding tank.
6.3 Changing flush modes
MasterFlush toilets offer two ush settings to help manage water consumption:
Normal flush – Uses 0.85 gal. (3.2 liters) per ush. Adds water to bowl after every ush.
Dry Bowl flush – Uses 0.45 gal. (1.7 liters) per ush. Does not add water to bowl after ush.
To change from Normal to Dry Bowl ush setting, press “Flush” switch for about ve seconds.
When “Power On” light (g.
3
3, p. 6) begins ashing, release “Flush” switch. Flush mode has
been changed to Dry Bowl setting. Change mode to Normal ush by following the same
procedure.
6.5 Bidet operation
(toilet models with
integrated bidet only)
1. Turn on bidet faucet by
turning handle away from
toilet (g.
4
).
2. Adjust water temperature by
turning handle up for warm
water and down for cool
water (g.
5
).
3. Use electronic “Flush” switch
to clear toilet bowl during
and after bidet use.
Caution! Hazard of Flooding
Be sure to shut bidet faucet off completely after use.
4 5