User guide

5
Dometic 8100 Series MasterFlush Toilet Intended use
4 Components
(g.
1
, page 2)
(g.
2
, page 2)
5.2 Minimum System Requirements
5 Specifications
5.1 Materials
Toilet: vitreous ceramic
Macerator pump body: glass-lled polypropylene
Dometic flush switch panel: powder-coated aluminum
Electrical
Circuit breaker 20amps/12VDC;15amps/24VDC
Wiring 12ga.(upto20ft./6.1mfrombreaker)
Water
Supply
Fitting 0.5 in. NPT
Flow rate 2.0gpm/7.6lpmminimum
Discharge
Inside diameter 1.5in./38mmor1in./25mm
Horizontal run 98ft./30mmaximum
Vertical run 9.8ft./3mmaximum
Specications are subject to change without notice.
Ref. Description
A Macerator toilet
B Dometicushswitch
C Electrical input wire
D Output wires (2) to toilet
E Inputwires(2)fromushswitch
F Output wires (2) to
ground connection
G Floor mounting hardware kit
H Floor mounting template
I Flush switch wall template
J Water valve adapter
K Discharge elbow tting
Ref. Description
1 Anti-siphon valve
2 Check valve
3 Discharge loop outlet
4 Discharge adapter tting
5 Discharge hose tting
6 Macerator pump
7 Water valve
8 Water valve tting - 0.5 in. NPT
Refer to complete parts list (packed separately)
for additional information.