User guide

10
VacuFlush Pedal-Flush ToiletMaintenance/Winterizing/Service
7.5 Clearing blockage in toilet base
1. Turn off water to the toilet.
2. Opentheushball.
3. Pull the foreign material from the 1-inch diameter orice at the bottom of the base or, using a
small diameter blunt rod, attempt to push the blockage through the orice.
7.6 Winterizing
Attheendofeachseason,theVacuFlushtoiletsystemshouldbewinterizedforstorage.The
following procedure should be used:
5000 SERIES
BASE ASSEMBLY
ADJUSTINGNUT
FLUSHBALL
SPRING
CARTRIDGE
WATERVALVEASSEMBLY
TOPVALVECAP
FILTER SCREEN
WATER
VALVE
SCREWS
VALVEBODY
SHAFT
FLUSHPEDAL
BAND
CLAMP
BALL SEAL
BOWL
SEAL
5000 SERIES BOWL, REAR VIEW
HOSE
CONNECTION
CHECKVALVE/
BOWL CONNECTION
1. Pump out holding tank.
2. Thoroughlyushsystemwithfreshwater.
3. Drainfreshwatertank.
4. Add freshwater antifreeze to freshwater
tank.
5. Flush freshwater water antifreeze and water
mixture through toilet and into the waste
holding tank. Each installation is different,
soamountsmayvary.Userdiscretionis
requiredtoassureadequateprotection.
6. Empty holding tank.
Note
Usenontoxicantifreezedesignatedforpotablewatersystems.(Seeboatorvehicle
owner’smanual.)
Caution
Never use automotive-type antifreeze in freshwater systems.
7.7 Troubleshooting guide