Owner's manual

12
Flush
Switch
Flush
Handle
Cable
Flush
Handle
FLUSH MECHANISM COMPONENTS
Mode
Switch
Input for
Power
Cable
CONTROL MODULE
Input
for
Flush
Cable
Input for
Base Assembly Cable
FLUSH HANDLE COMPONENTS
(3300 series)
1. To access base
assembly components,
remove decorative screw
caps and unscrew two
bolts that hold ceramic
toilet to oor.
2. Remove access cover
from top of ceramic and
set it aside.
3. Lift ceramic toilet
straight up from base
and set it down just in
front of oor ange.
Turn off water to
toilet and disconnect
exible water line. Dis-
connect power wires
and/or ush switch
wires if necessary.
REMOTE FLUSH SWITCH
(3400 series)
Base Assembly
Cable
BASE ASSEMBLY COMPONENTS
(under ceramic toilet)
Water Valve
Flush Ball
Closed Limit
Switch
Motor
Drive Arm
Rotor Arm
Flush Valve
Motor
Flexible Water Supply Hose
Open Limit
Switch