Specifications

WORKSPACE REQUIREMENTS

• Keep the area around your laminator clear with

adequate space around it so you can feed, receive

and trim mounted and/or laminated images.

• An area 15’ x 11’ (4.5m x 3.4m) is the smallest area

recommended. We recommend a room size of 20’x

18’ (6.1m x 5.49m) to accommodate a laminator and

2 (4’ x 8’) tables on castors for finishing/layout

work. This area is required for loading and

unloading rolls of material onto the unwind shafts

and feeding and receiving the maximum mounting

board lengths into the laminator correctly.

NOTE: Maximum board lengths are up to 12

feet long.

• The work area should be level, flat, and well lit.

61"/155 cm

Maximum board length

31 inch (Door clearance)

78 cm

Room Length = 2 x max. board length + 59" (150 cm)

59"/150 cm

Minimum Room Width =15 feet/4.5 meter

21"/53cm

Minimum Room Length = 11 feet / 3.4 meter

Rolls of Media

21"/53cm

Unwind Supply Shafts

Figure 2. Workspace Area Diagram