Owner`s manual

6
FEEDING IMAGES
USING THE IMAGE GUIDE ON THE FLAT
TABLE
• To aid with feeding in images, the rear table is
provided with an “Image Guide”.
• This device can be positioned in front of the roller
and it prevents the images from interrupting the
photoelectric eyes.
• The image guide can be removed when mounting
boards.
Figure 2. Installing the Rear Table Image Guide
POSITIONING THE IMAGE GUIDE ON THE
FLAT TABLE
• To position the Image Guide, push it completely in
towards the roller aligning the outer notches with
the thumbscrews in the table.
• Tighten the thumbscrews down to secure the image
guide in place. You are ready to feed images.
• To assist with this, the edge of the image can be
seen through the windows in the “Image Guide”,
which is in front of the rollers.
Figure 3. Placement of the Image Guide