Specifications

8
the rollers and to avoid extensive
replacement costs.
WARNING: When the laminator is not in use,
adjust the shim wheels to create a gap
between the laminating rollers to
prevent flat spots from developing. Flat
spots would affect the quality of the
output and void the warranty
replacement.
CAUTION: Static Shock Risk – Because under
certain contions, the unrolling films
can cause a build up of static
electricity, the operator is cautioned to
be aware of this and take appropriate
safeguards to prevent static shock.
CAUTION: The main rollers should be together
and turning while heating up to prevent
uneven hot spots on the roller.
Stationary rollers will develop
concentrated heat in one area, which
will damage the roller. Pivot the front
table away from the heated roller when
not in use to prevent possible warping.
SERVICING AND REPLACEMENT PARTS
Service and maintenance must be performed fully in
accordance with the provided instructions. Servicing by
any unauthorized technician voids the warranty. Service
technicians must use replacement parts as specified by
SEAL Graphics.
CAUTION: Service Technicians must perform
safety checks after completing any
service or repairs to the laminator.