Specifications

5
UNPACKING, SET-UP AND INSTALLATION
Only skilled personnel should perform installation.
Read and comply with all warnings and follow the
proper installation procedures and safety guidelines.
Refer to the outside of the crate for Uncrating and
Recrating instructions.
Take into account the weight of the laminator (1850-
lb./839 kg shipping weight) when moving. Use equipment
that can safely lift the weight. The laminator is shipped on
a wooden pallet (skid). While the laminator is still on the
skid, it may be moved using a forklift to position it near its
place of use.
CAUTION: Set the forks of the forklift to the
maximum lifting width of the
laminator, so the laminator’s center of
gravity is central between the forks.
CAUTION: Do not lift the laminator with a forklift
once it has been removed from its skid.
Doing so may damage the unit and
void the warranty.
NOTE: We recommend that you save the transport
bolts, nuts and plates of the shipping crate
for any major moves that you plan to make
with the laminator in the future.
Remove the cardboard boxes containing the tables and set
aside.
Remove the transport bolts from the skid’s transport plates
using an open-end or adjustable wrench. Using the wrench,
back the bolt up enough to clear the cabinet castors for
ease in moving.
Your laminator has castors to allow for easy movement.
Roll the laminator to the location it will be used. (See
Workspace Area Diagram – Figure 1).
Lock the castors once it is in place. Remember to unlock
them before moving the laminator again.
Figure 2: Moving the laminator with a forklift.
Accessories Included:
• Grease Gun Kit
• Spare Fuses (Inside Cabinet)
• Tape Measure
• Snitty Safety Knife
• Image Roll Cleaner
• Roll Cleaning Towel
• Spare Core for Wind-up Shafts
• Owner’s Manual
• Installation Instruction Sheet
• Quick Connect Coupler (supplied with all
laminators)
Available Options:
• Leveling Feet
• Auto-Grip Wind-up Idler