Specifications

39
TECHNICAL SPECIFICATIONS
Mechanical
Dimensions (H x W x D)
56 in. x 85 in. x 57 in. (1423 mm x 2159 mm x 1448
mm)
Net Weight 1,300 lbs. ( 590.1 kg)
Shipping Weight 1,850 lbs. ( 841 kg)
Roller Construction Main: (2) 6 in. (15.24 cm) Aluminum Crowned Rollers
Pull: (2) 4 in. (10.16 cm) Steel Flat Rollers.
Process
Max. Working Width 61 in. maximum (1550 mm)
Max. Roller Speed 15 ft/min. (4.5 m/min.)
Core Inner Diameter 3 in. (76 mm)
Maximum Board Thickness 1 in. (25.4 mm)
Nip Settings 0, 1/16, 1/8, 3/16, 1/4, 3/8, 1/2, 3/4, 1 and –1/16 in.
(0, 2, 3, 5, 6, 10, 13, 19, 25 and -2 mm)
Max. Main Roller Temperature
275°F (135°C)
Electrical
Electrical Requirements
Single phase 208-230V, 50/60Hz, 1 Phase, 36A Max.
Maximum Power consumption 8,280 watts
NOTE: Airborne Noise Less than 70DB(A)
Enviornment
Temperature
50°F to 86°F (16°C to 30°C)
Relative Humidity 30% to 79% Relative Humidity
Moisture Dry Moisture Free Enviornment
Cleanliness Clean and Dust Free Environment
Order Codes
SEAL Image 600 MD, Single phase 63600
SEAL Image 600 MD, Single phase, International 63601
Each SEAL Image laminator has a Serial Number Label. This label indicates the model type, the electrical requirements,
and the laminator serial number (important for reference if any servicing is required).
The Serial Number Label is located on the right side cabinet when facing the rear.