Specifications

30
LOW-TEMP VINYL TRANSFER
This process involves transferring an image onto a flexible vinyl. Top roller temperature and amount of main
roller downward pressure is dependent on the type of toners. Use the minimum amount of pressure required for
successful transfer.
MEDIA: Electrostatic
FILMS:
-- -- -- Top Unwind Shaft: Media with Toners
____ Bottom Unwind Shaft: Banner Vinyl
LAMINATOR SETTINGS
Front Control Panel
Top Roller Temp: 250-275°F (121-135°C)
Bottom Roller Temp: 140-150°F (60-65°C)
Main Roller Pressure: 80-100 PSI
Cooling Fan: ON (Under chill idlers)
Rear Control Panels
Pull Rollers: Down
Pull Roller Pressure: 40-60 PSI
Pull Clutch Tension: 40-60 PSI
Motor Control Panel
Motor Direction: Forward
Motor Speed Setting: 1.5-5 FPM (.5-1.5 MPM)
WEBBING SETTINGS
Web Tension Top: Medium to Heavy
Web Tension Bottom: Light to Medium
Chill Idlers: Over 1
st
/ Under 2
nd
Shim Wheel Settings: -1/16 in. (-2 mm)
Figure 27: Webbing for Vinyl Transfer