Specifications

28
ENCAPSULATING
This process involves completely sealing an image between two films.
MEDIA: Ink Jet, Electrostatic, and Photographic
FILMS:
-- -- -- Top Unwind Shaft: Heat-activated Laminate 3 – 5 Mil
____ Bottom Unwind Shaft: Heat-activated Laminate 3 – 5 Mil
LAMINATOR SETTINGS
Front Control Panel
Top Roller Temp: 205-215°F (96-102°C)
Bottom Roller Temp: 205-215°F (96-102°C)
Main Roller Pressure: 35-40 PSI
Cooling Fan: OFF
Rear Control Panels
Pull Rollers: Down
Pull Roller Pressure: 35-40 PSI
Pull Clutch Tension: 40-60 PSI
Motor Control Panel
Motor Direction: Forward
Motor Speed Setting: 3-5 FPM (1-1.5 MPM)
WEBBING SETTINGS
Web Tension Top: Medium
Web Tension Bottom: Medium
Chill Idlers: Over 1
st
/ Under 2
nd
Shim Wheel Settings: 0
NOTE: Follow the webbing instructions for films
specific for your location.
Figure 25: Webbing for Encapsulating