Specifications

22
FEEDING IMAGES
BASIC STEPS TO FEEDING IMAGES
1. Make sure the leading edge of each image is flat all the
way across or any wrinkles or creases in the image will
show when laminated perhaps even magnified.
2. A straight leading edge will aid in feeding in the image.
3. Feed the image into the laminator ensuring that the
leading edge is parallel to the roller.
NOTE: Do not stop the motor while an image is
being finished as this can cause marks in
the output.
USING THE PRINT GUIDE TABLE
Your laminator is designed with Print Guide Tables to
assist in feeding images into the nip.
Figure 17: Print Guide Table
Feeding images under the print guide, directly into the nip,
prevents the images from lifting up and interrupting the
photo eyes.
Figure 18: Feeding Images under the print guide