Specifications

TOP MOTOR CONTROL PANEL

Figure 7: Top Motor Control Panel

MOTOR CONTROL PANEL OPERATION

1. Speed Adjustment Knob

Use this knob to adjust the speed of the roller rotation.

Turn the knob clockwise to increase the speed of the roller

rotation and counter-clockwise to decrease its speed. The

speed of the rollers is continuously adjustable between 0

and 15 ft /min. (0 and 4.6M/min.). Roller speed can be

viewed in the top display readout on the front control

panel.

2. Reverse Roller Direction Switch

Pressing the Motor Stop Switch and this switch will cause

the rollers to rotate in the reverse direction when standing

at the front of the laminator. This direction will be used

when processing cold pressure-sensitive films from the

rear of the laminator through the pull rollers.

3. Motor Stop Switch

Pressing this switch stops roller rotation.

NOTE: Whenever the rollers are rotating, you must

press this switch prior to changing roller

direction.

4. Forward Roller Direction Switch

Pressing the Motor Stop Switch and this switch will cause

the rollers to rotate in the forward direction when standing

at the front of the laminator.