Specifications

12
PULL ROLLER CONTROLS
The Pull Roller controls are located on the right side
cabinet when facing the rear of the laminator.
1. Air Regulator Knob: Adjusts the downward pressure of
the top pull roller. Turn clockwise to increase the
pressure.
2. Air Pressure Gauge: Indicates the PSI reading for the
downward pressure of the top pull roller. The standard
setting for the normal operation is 35-55 PSI.
3. Roller Up/Down Switch (Rear, Top): Press the switch
up to raise the roller. Press the switch down to lower
the roller.
Figure 5: Pull Roller Controls
0
2
4
6
8
1
1
1
1
1
2
3