Specifications

10
LAMINATOR FEATURES
Figure 3: Laminator Features
STANDARD FEATURES
1 - Control Panel System
For independent control of pressure, temperature, cooling
system and read-out of speed and material usage.
2 - Top Motor Control Panel
Controls in-feed direction and processing speed.
3 - Shim Wheels (4)
Dial-in roller height adjustment for fast and accurate roller
nip setting, which adjusts for the thickness of the material
to be processed
4 - Integral Braking System
A simple braking system with a knurled collar provides the
means of adjusting the brake tension for the films and
images. Fitted on both roll easel shaft and the two unwind
shafts.
5 - Swing-Out Autogrip Unwind Shafts (2)
Easy loading and positioning of materials. No need for
manual locking keys. Suitable for rolls wound onto a 3? ID
core.
6 - Autogrip Wind-up Idlers (3)
Removable shafts for winding up the release liner, finished
images or other laminate material. Use with 3? ID spare
cores.
7 - Emergency Stop Buttons (4)
Immediately ceases the laminator’s operation and raises the
rollers.
8 - In-feed Tables (2)
Front and rear table with image guide for flat, wrinkle-free
feeding of digital prints
9 - Covered Foot Switches (2)
Allows for user control of roller speed when feeding in
images. See Footswitch Operation for additional
information.
SPECIAL FEATURES
** Bi-Directional Operation
Eliminates the need for cool-down allowing quick
application changeovers.
** Dual-Position Cooling Tube
Offers quick and uniform cooling for smooth, flat output
during heat-activated processes. Can be positioned above or
below the chill idlers and can be rotated to direct airflow as
desired.
** Drive System
Heavy-duty Clutch and simplified drive system – Provides
smoother performance at all speeds and different film
thickness.
** Heating Elements
Electric High-Wattage Heating Elements and Temperature
Controls with Infrared Temperature Sensors – Provide for
rapid, even heating to 275° F (135°C) and maximum
accuracy.
1
2
5
6
3
3
7
8
5
9
4