Operating instructions

37
Cleaning & Maintenance
Maintenance
Remove of right cover
1. Remove the hand wheel for roller up/down. Press the central plastic cap at one end to swivel it,
than remove it for access to the screw and washer.
2. Remove the screw using a 5 mm Allen key and the remove the hand wheel.
3. Turn the pre-pressure knob until the hexagon cap nut is free. Remove the hexagon cap nut
using a 13 mm ring spanner and remove knob.
4. Remove the 4 tap screws with Philips no. 2 screwdriver.
5. Remove cover.
Remove of left cover
1. Remove the 4 screws with Philips no. 2 screwdriver
2. Remove cover.
Chain tensioning
1. Check chain tension twice a year.
2. To tension chain if too slack. use a 5mm Allen key to loosen the 2 bolts securing the top motor
and move motor down to tension the chain. Re-tighten the 2 bolts.
3. Then loosen the 2 bolts securing the bottom motor and move motor up to tension the chain.
Tighten the 2 bolts.