Operating instructions

30
Feed-in table
The machine has:
•
••
•
A Swinging feed-in table
for easy loading, with integrated Emergency Stop System.
•
••
•
An Image guide
to help feed-in images and to prevent paper handling problems, and is
removable when mounting.
Before swinging the table remove the Image guide” and store underneath the laminator at a safe
place.
The swinging feed-in table has 2 lock bolts. To be able to swing the table open for easy webbing,
first pull the left hand lock bolt and rotate to lock it. Then pull the right hand lock bolt and swing
feed-in table open.`
WARNING:
Hold the table by hand when unlocking to prevent accidents.
When the table is in the open position, easy webbing the film from the bottom supply shaft is
possible.
NOTE:
If the table is swung open, it is not possible to start the rotation of the rollers.
After webbing, swing the table back to the operating position and make sure that both lock bolts
snap into position. the right hand lock bolt snaps in and rotate and snap in the left hand lock bolt.
WARNING:
Do not sit or stand on the table.