Operating instructions

16
Operating Conditions
Temperature
10
0
C - 50
0
C (50
0
F - 122
0
F)
Do not expose the laminator to direct sunlight as output quality may be affected.
Moisture
30% ~ 95% non-condensing
Ideal humidity ~ 55%
Dust
Avoid a dusty environment because the films used on this laminator will attract dust and the output
quality will be affected.
Connection to the Electrical Supply
In process of setting up your
IMAGE 60C/S
, the laminator will require to the electrical supply. This
should only be carried out by a qualified person.
NOTE:
The laminator is supplied with a 2.5 meter (8 feet) cable including a mains plug, in
accordance with the identification plate. If the plug has to be changed, then the wire colours mean:
In case of single phase operation 60C:
Cable colours:
Green/Yellow Ground (Earth)
Brown Live phase 1
Blue Neutral
In case of three phase operation 60S:
Cable colours:
Green/Yellow Ground (Earth)
Brown Live phase 1
Live phase 2 not used
Live phase 3 not used
Blue Neutral
Should you have any questions regarding the installation of your IMAGE 60C/S, please contact
your local Distributor.