User manual

5.3 Loading film rolls 41
5.3.1 Auto-grip shafts 41
5.3.2 Use of films with release liner 41
5.3.3 Loading shaft with film rolls 42
5.3.4 Presetting the tension 43
5.3.5 Pressure setting 43
5.4 Webbing 44
5.4.1 Upper section only 44
5.4.2 Upper and lower section 44
5.4.3 Webbing both upper and lower films. 45
5.4.4 Roll to roll 46
5.4.5 Pull rollers 47
5.5 Processes and settings 47
5.5.1 Mounting images or decals 47
5.5.2 Pre-coating panels 48
5.5.3 Single-sided lamination 49
5.5.4 Double-sided lamination 49
5.5.5 Encapsulation 49
5.5.6 Over-lamination 50
5.5.7 Decaling 50
6. Maintenance 53
6.1 Cleaning 53
6.1.1 Cleaning the silicone covered rollers. 53
6.2 Preventive maintenance 54
6.2.1 Auto-grip shafts 54
6.3 Trouble shooting 54
6.3.1 Pressure too high 54
6.3.2 Pressure too low 55
6.3.3 Unwind tension too low 55
6.3.4 Pull tension too low 55
6.3.5 Too much heat in the final result 56
6.3.6 Roller alignment fault 56
6.3.7 Material rolls are jumping 56
6.3.8 Machine operation issues 57
6.3.9 Error Messages on the EOI 57
6.3.10 Technical assistance 58
7. Glossary 59
6 7003338 - User Manual 65 Pro MD