User manual

English
5.4.5 Pull rollers
The pull rollers are generally used in the encapsulation process (hot processing double
sided lamination) to get a better encapsulation result.
• Before webbing set the top pull roller in the upper position and lock it on both sides.
• Webbing is the same as described before, except the films are now, with a leader
board, pushed through the main roller nip and the pull roller nip.
5.5 Processes and settings
5.5.1 Mounting images or decals
In this process the machine is not webbed with film.
• When mounting images onto a (pre-coated) board (B), the adhesive is on the mounting
side of the board.
• When mounting decals, the adhesive is on the back of the image.
The mounting process is the same for both.
a. Remove the shafts from the upper section.
b. Preset the nip and the pressure (see section 5.1).
c. Put the board on the in-feed table.
Figure 16: Mounting images or decals
Machine Operation 47