User manual

5.2.3 Slow mode
Slow mode is activated when the laminator is running and the photo eyes at the in feed
side of either nip are blocked. This is indicated by the snail icon on the EOI screen.
Entering slow mode will force the machine to run at 2 ft per minute unless the
potentiometer is turn all the way to zero (counter-clockwise).
WARNING:
KEEP CLEAR OF THE NIP WHEN RUNNING AT SLOW MODE SPEED.
When running at slow mode speed, the in feed photo eyes will not stop the roll rotation.
Note:
To change from slow mode to normal mode without stopping just press the snail icon on
the EOI. If you are using the foot switch you must also press the forward button before
you release the foot switch.
40 7003338 - User Manual 65 Pro MD