User manual

Figure 13: Pendant Controls
Speed potentiometer (1):
The speed potentiometer increases the
speed of the machine as it is turned
clockwise. The speed is reduced by turning
the knob counter-clockwise. The current
speed setting is displayed on the EOI.
Stand by switch (2):
The machine can be placed into the standby mode by toggling the standby switch. After
the switch is toggled, a confirmation message will appear on the EOI. Press the check
button to enter the standby mode. In standby the rolls will be moved to the raised position,
the heaters will be shut off, the roll motor will be switched off, and the nip set points will be
moved to 1 inch. Toggle the standby switch again to turn off the standby mode. When
coming out of standby the nip set points will return to the last set point. Use the EOI to turn
the motor and heaters back on. Toggle the roll control switches to lower the rolls.
38 7003338 - User Manual 65 Pro MD