User manual

1. Number entry pad
a. Actions: Pressing any number first clears the current value in the nip height display
and then displays the numbers pushed in order from left to right.
b. The – and / symbols are used for fractional number entry in the form of “1-3/8” to
represent 1.375”.
c. The X symbol is used to clear the nip height display and reset the “current” set
point to the display.
d. The check symbol accepts the value in the nip height display as the “new” set point
and closes the nip screen and reverts the display to the main screen.
2. Preset buttons (6)
a. Action: Enters a decimal number into the nip height display that is equal to the
fraction shown on the button.
3. Nudge buttons
a. Action: Increments the number in the nip height display by .01 inch each time the
button is depressed.
b. If the button is held down it goes automatically by the .01 increments until it is
released.
4. Nip height display
a. Displays the “current” nip height set point until one of the preset, nudge, or
number pad buttons is pressed. After that it displays the numbers entered. If the
check mark is pressed the value in the nip height display becomes the “new” nip
height set point.
5. Nip pressure display
a. Display a percent of nip pressure (1-100), updates real time.
b. One end of the display will turn red if the pressure moves into the “danger” area of
the scale (i.e. below 15% and above 85%).
32 7003338 - User Manual 65 Pro MD