User manual

English
1. Heater on / off button
a. This is a toggle button to turn the heater on or off, the window in the button
turns red when the heater is on.
2. Number entry pad
a. Actions: Pressing any number first clears the current value in the
temperature set point display and then displays the numbers pushed in order
from left to right.
b. The X symbol is used to clear the temperature set point display one number
at a time.
c. The check symbol accepts the value in the temperature set point display as
the “new” set point and closes the screen, reverting display to the Home
screen.
3. Preset temperature buttons
a. Press a button to enter the value into the set point display window.
4. Nudge buttons
a. Action: Increments the number in the Temperature set point display on the
number pad by 1 degree up or down each time the button is depressed.
b. If the button is held down it starts to increment by one degree automatically.
5. Temperature set point display
a. Displays the “current” temperature set point until a nudge, preset, or one of
the number pad buttons is pressed. After that it displays the numbers
entered. If the check mark is pressed the value in the temperature set point
display becomes the “new” temperature set point.
6. Current temperature display
a. Display the current temperature of the roll, updates real time.
b. One end of the display will turn red if the temperature moves into the
“danger” area of the scale (i.e. within 15% of max). This is a warning that the
machine should not be operated at these temperatures continuously.
Machine Operation 27