User manual

3.2 Installation
a. Move the machine (and the accessories) to its final location.
Note: Allow ample working space. See figure 4.
.
Figure 4: Working space.
Working space
Width 140 in. 350 cm
Depth 2x maximum board length + 75 in. 190 cm
Note:
Anti-static clothing and footwear of the operator and an anti-static floor coating will help
reduce the build up of electrostatic (dis)charges (ESD).
A relative humidity of at least 70% also helps reduce ESD build up.
b. Lock the casters to keep the machine from moving.
c. Remove all transport material.
• Cut the straps around the shaft suspensions and remove the foam pads.
• Cut the straps holding the in-feed table arms.
• Cut the straps around the rollers.
16 7003338 - User Manual 65 Pro MD