User manual

English
3. INSTALLATION
WARNING:
INSTALLATION MUST BE CARRIED OUT BY SKILLED PERSONNEL.
Note:
Make sure that the machine, in its final location, has adequate space. You will need
room to feed, receive and trim images.
Only skilled personnel should perform installation. Read and comply with all
warnings and follow the proper installation procedures and safety guidelines.
Refer to the outside of the crate for uncrating and re-crating instructions.
Take into account the weight of the laminator (1955 lb/887 kg shipping weight) when
moving. Use equipment that can safely lift the weight. The laminator is shipped on a
wooden pallet (skid). While the laminator is still on the skid, it may be moved using a
forklift to position it near its place of use.
CAUTION:
Set the forks of the forklift to the maximum lifting width of the laminator, so the
laminator’s center of gravity is central between the forks.
CAUTION:
Do not lift the laminator with a forklift once it has been removed from its skid. Doing
so may damage the unit and void the warranty.
CAUTION:
Set the forks of the forklift to the maximum lifting width of the laminator, so the
laminator’s center of gravity is central between the forks.
3.1 Unpacking
Please watch the unpacking video for this machine at www.sealgraphics.com
At delivery, the machine is packed in a plastic bag to avoid moisture penetration. It is
transported in a carton box and is fastened onto a wooden pallet.
Note:
Unpacking the machine requires at least 2 persons.
The machine is equipped with castors that allow easy movement.
Installation 13