User Manual

4
.1.4.Power LED indicator extinguish when connected,now keyboard and computer paired successfully;
4.1.5.Default to connect with the already paired conputer when start bluetooth keyboard next time;
4.1.6.When the keyboard and computer connected and using smoothly,if the keyboard need to connect with another computer,please
repeat the operation according to point 2;
4.1.7.Close the keyboard
press the on/off buttom about 3 seconds,keyboard power indicator flashing to indicate the keyboard closed;
5.Charging
When the keyboard is working,if the Charge power indicator flashing,which means your keyboard is low electricity,the keyboard
should be charged according to the following steps:
5.1.Plug the USB charging cable into the computer USB port or into the iPad USB adapter, and the other-end into the keyboard USB
charging port,
5.2.When charging, the charging indicator light is switched on, once the battery is fully charged, the charging indicator light will
switch off, the theoretical charging time is about 1.5 ~ 2 hours.
6.Storage
6.1.When the keyboard is not required to work any more or to be carried on the go, please remember to keep the keyboard's power off
to save battery life.
6.2.If the keyboard is to be stored for a long time, please remember to charge the battery for about 1 hour to keep half electricity,
which would enhance the keyboard lithium battery lifetime.
7.Troubleshooting
7.1 keyboard and iPad can not achieve connection:
7.1.1.Please check if your iPad Bluetooth function toggle is on and enter into searching status;
7.1.2.Please check if the Bluetooth keyboard light is flashing, enter into pairing mode, if not, just restart the keyboards;
7.1.3.Please check if the keyboard is connected with the iPad within 10 meters.
7.1.4.Please check if the Bluetooth devices connecting to the iPad are changed and then restart the pairing job again.
7.1.5.Please check if the iPad is stayed in the connection with other Bluetooth devices, and make sure the connected Bluetooth
devices quantities are not over Bluetooth protocol limit.
7.1.6.Please check if the battery has enough electricity to continue work, if not, please charge the keyboard and try once again.
7.2 Each time closed the keybaord power and open again,or computer closed and open again,keyboard
without response: