Use and Care Manual

T D S
P D
SEAL-ONCE® MARINE Premium Wood Sealer protects and
stabilizes wood against water damage and decay. It uses
proprietary nanotechnology to penetrate, coating the wood
fibers at the cellular level. The advanced technology of
MARINE allows it to form a superior barrier below the surface,
protecting from the inside out.
MARINE allows wood to age naturally without decay, and can
be used to preserve old or new wood, extending its natural
life. It is non-film forming and will not alter the natural beauty
of the wood. It is also completely eco-friendly and can be
applied around or over open water.
MARINE preserves the integrity of the wood by inhibiting
warping, cupping, rot, mold, mildew and algae growth.
MARINE forms a flexible breathable barrier that allows the
wood to expand and contract, and for water vapor to
escape.
MARINE goes on milky white and dries clear. It is also available
in semi-transparent tints.
F
• Eco-friendly
• Non-toxic; will not harm pets, plants, people or marine life
• Ultra-low VOC
• Water based
• Can be applied around or over fresh or salt water
• Flexible, breathable barrier
• Stabilizes & protects wood
• Helps resist warping, cupping, wood rot & decay
• Resistant to salt water spray
• Helps resist mold, mildew & algae growth
• Soap and water cleanup
• Tinted formula provides additional UV protection
P C
Color Milky white liquid, dries clear
Flash Point None
pH 7+
Solvents Water
lbs/gal 8.5
Specific Gravity 1.019
Viscosity 50 cps
Application Temp. 45°F/7.22°C* - 95°F/35°C
Odor Nil
VOC Content 25g/L**
*Do not apply when air or surface temperature is below 45°F/7.22°C or may fall below
45°F/7.22°C within 24 hours after application.
**VOC Content determined via EPA Method 24.
R A
•
• Docks
•
• Outdoor furniture
*Not for use below grade or in direct contact with water.
P S
1 Gallon Can | 5 Gallon Pail
F C
55
Thermally Modified
Swing Sets